下载APP送36元彩金

电话:0755-28027380 传真:0755-28027382
24小时热线:13926530627 联系人:蒋先生
下载APP送36元彩金 | 关于我们 | 产品展示 | 产品总汇 | 润滑油知识 | 下载APP送36元彩金 | 联系我们
专注于工业润滑领域一站式采购 电话:0755-28027380 传真:0755-28027382 手机:13926530627 13537722320
润滑油分类
液压油系列
齿轮油系列
空压机油
切削液切削油
导轨油
涡轮机润滑油
冷冻机油系列
船用机油
润滑脂系列
变压器油

工业润滑油工业润滑油
 
产品展示 >> FUCHS RENOLIN AW 32
FUCHS RENOLIN AW 32详细说明 (浏览1216次)

RENOLIN AW

Zinc- and Ash-Free HM Hydraulic Oils and CKC Lubricating Oils

Zinc- and Ash-Free HM Hydraulic Oils and CKC Lubricating Oils

Zinc-free hydraulic oils have steadily gained popularity over the last few years.
In many cases, the use of a zinc-free hydraulic oil is a must, especially in machine tools where hydraulic fluids can contaminate metalworking fluids. RENOLIN ZAF B hydraulic oils are zinc- and ash-free HM hydraulic oils complying with ISO 6743-4.

The most important features of RENOLIN ZAF B hydraulic oils are:


  • Good oxidation stability and good resistance to ageing
  • Powerful EP properties and very good wear protection
  • Excellent corrosion protection
  • Rapid air release and low foaming
  • Good demulsification characteristics
  • Good compatibility with sealing materials
Application:

RENOLIN ZAF B products are high-grade HM hydraulic oils according to ISO 6743-4 which can be used in all hydraulic systems but also as CKC lubricating oils according to ISO 6743-6 in gearboxes, bearings and circulating systems. RENOLIN ZAF B products are recommended for use in machine tools where contact between hydraulic oils and metalworking fluids can take place.

RENOLIN AW 32 46 68
Hydraulic oil type
acc. to ISO 6743-4 HM 32 HM 46 HM 68
acc. to DIN 51 502 HLP 32 HLP 46 HLP 68
Lubricating oil type
acc. to ISO 6743-6 CKC 32 CKC 46 CKC 68
acc. to DIN 51 502 CLP 32 CLP 46 CLP 68
Characteristics Unit Test method
Colour 1 1 1 ASTM D 1500
Kinematic viscosity
at 40 °C mm²/s 31.5 45 65.4 ASTM D 445
at 100 °C mm²/s 5.3 6.7 8.4 ASTM D 445
Viscosity index 98 101 98 ASTM D 2270
Density at 15 °C kg/l 0.878 0.878 0.885 ASTM D 1298
Flash point, Cleveland open cup °C 215 230 230 ASTM D 92
Pour point °C -30 -27 -21 ASTM D 97
Neutralization number mg KOH/g 0.3 0.3 0.3 ASTM D 974
Saponification number mg KOH/g 1.3 1.3 1.3 ASTM D 94
Water content % mass not traceable not traceable not traceable ASTM D 95
Insolubles % mass not traceable not traceable not traceable DIN 51 592
Demulsification min 10 10 15 DIN 51 599
Air release at 50 °C min 3 8 7 ASTM D 3427
Foaming,
seq. I ml 30/0 50/0 50/0 ASTM D 892 seq. I-III
seq. II ml 20/0 20/0 20/0 ASTM D 892 seq. I-III
seq. III ml 20/0 20/0 20/0 ASTM D 892 seq. I-III
Copper corrosion degree of corr. 1a-100A3 1a-100A3 1a-100A3 ASTM D 130
Rust prevention pass A pass A pass A ASTM D 665
Ageing behaviour, increase in neutralization number after 1000 h mg KOH/g < 2 < 2 < 2 ASTM D 943
Brugger boundary friction test N/mm² 38 DIN 51 347 (D)
FZG mechanical gear rig test load stage > 12 > 12 > 12 DIN 51 354-2
Vickers vane pump test, loss of mass
on ring mg 120 120 120 IP 281
on vanes after 250 h mg 30 30 30 IP 281
Effect on SRE-NBR 1 seal material acc. to DIN 53 538-1 at 100 °C +/– 1 °C after 7 days +/– 2 hours,
上一产品: Univis™ N (优力威™ N系列)液压油
下一产品: FUCHS RENOLIN B 10
Copyright (C)  深圳市鑫盈科贸易有限公司 http://86hrb.com All Right Reserved
地址:深圳宝安龙华区民治工业区 电话:0755-28027380 传真:0755-28027382 网址:http://86hrb.com 邮箱:xykrhy@126.com 
网站关键词:工业润滑油|壳牌润滑油|美孚润滑油|福斯润滑油|加德士润滑油|嘉实多润滑油 
标识