下载APP送36元彩金

电话:0755-28027380 传真:0755-28027382
24小时热线:13926530627 联系人:蒋先生
下载APP送36元彩金 | 关于我们 | 产品展示 | 产品总汇 | 润滑油知识 | 下载APP送36元彩金 | 联系我们
专注于工业润滑领域一站式采购 电话:0755-28027380 传真:0755-28027382 手机:13926530627 13537722320
润滑油分类
液压油系列
齿轮油系列
空压机油
切削液切削油
导轨油
涡轮机润滑油
冷冻机油系列
船用机油
润滑脂系列
变压器油

工业润滑油工业润滑油
 
产品展示 >> FUCHS RENOLIN ZAF 32B
FUCHS RENOLIN ZAF 32B详细说明 (浏览1161次)

RENOLIN ZAF B

Zinc- and Ash-Free HM Hydraulic Oils and CKC Lubricating Oils

Zinc- and Ash-Free HM Hydraulic Oils and CKC Lubricating Oils

Zinc-free hydraulic oils have steadily gained popularity over the last few years.
In many cases, the use of a zinc-free hydraulic oil is a must, especially in machine tools where hydraulic fluids can contaminate metalworking fluids. RENOLIN ZAF B hydraulic oils are zinc- and ash-free HM hydraulic oils complying with ISO 6743-4.

The most important features of RENOLIN ZAF B hydraulic oils are:


  • Good oxidation stability and good resistance to ageing
  • Powerful EP properties and very good wear protection
  • Excellent corrosion protection
  • Rapid air release and low foaming
  • Good demulsification characteristics
  • Good compatibility with sealing materials
Application:

RENOLIN ZAF B products are high-grade HM hydraulic oils according to ISO 6743-4 which can be used in all hydraulic systems but also as CKC lubricating oils according to ISO 6743-6 in gearboxes, bearings and circulating systems. RENOLIN ZAF B products are recommended for use in machine tools where contact between hydraulic oils and metalworking fluids can take place.

RENOLIN ZAF 32 B 46 B 68 B
Hydraulic oil type
acc. to ISO 6743-4 HM 32 HM 46 HM 68
acc. to DIN 51 502 HLP 32 HLP 46 HLP 68
Lubricating oil type
acc. to ISO 6743-6 CKC 32 CKC 46 CKC 68
acc. to DIN 51 502 CLP 32 CLP 46 CLP 68
Characteristics Unit Test method
Colour 1 1 1 ASTM D 1500
Kinematic viscosity
at 40 °C mm²/s 31.5 45 65.4 ASTM D 445
at 100 °C mm²/s 5.3 6.7 8.4 ASTM D 445
Viscosity index 98 101 98 ASTM D 2270
Density at 15 °C kg/l 0.878 0.878 0.885 ASTM D 1298
Flash point, Cleveland open cup °C 215 230 230 ASTM D 92
Pour point °C -30 -27 -21 ASTM D 97
Neutralization number mg KOH/g 0.3 0.3 0.3 ASTM D 974
Saponification number mg KOH/g 1.3 1.3 1.3 ASTM D 94
Water content % mass not traceable not traceable not traceable ASTM D 95
Insolubles % mass not traceable not traceable not traceable DIN 51 592
Demulsification min 10 10 15 DIN 51 599
Air release at 50 °C min 3 8 7 ASTM D 3427
Foaming,
seq. I ml 30/0 50/0 50/0 ASTM D 892 seq. I-III
seq. II ml 20/0 20/0 20/0 ASTM D 892 seq. I-III
seq. III ml 20/0 20/0 20/0 ASTM D 892 seq. I-III
Copper corrosion degree of corr. 1a-100A3 1a-100A3 1a-100A3 ASTM D 130
Rust prevention pass A pass A pass A ASTM D 665
Ageing behaviour, increase in neutralization number after 1000 h mg KOH/g < 2 < 2 < 2 ASTM D 943
Brugger boundary friction test N/mm² 38 DIN 51 347 (D)
FZG mechanical gear rig test load stage > 12 > 12 > 12 DIN 51 354-2
Vickers vane pump test, loss of mass
on ring mg 120 120 120 IP 281
on vanes after 250 h mg 30 30 30 IP 281
Effect on SRE-NBR 1 seal material acc. to DIN 53 538-1 at 100 °C +/– 1 °C after 7 days +/– 2 hours,
上一产品: Univis™ N (优力威™ N系列)液压油
下一产品: FUCHS RENOLIN ZAF 32D
Copyright (C)  深圳市鑫盈科贸易有限公司 http://86hrb.com All Right Reserved
地址:深圳宝安龙华区民治工业区 电话:0755-28027380 传真:0755-28027382 网址:http://86hrb.com 邮箱:xykrhy@126.com 
网站关键词:工业润滑油|壳牌润滑油|美孚润滑油|福斯润滑油|加德士润滑油|嘉实多润滑油 
标识