下载APP送36元彩金

电话:0755-28027380 传真:0755-28027382
24小时热线:13926530627 联系人:蒋先生
下载APP送36元彩金 | 关于我们 | 产品展示 | 产品总汇 | 润滑油知识 | 下载APP送36元彩金 | 联系我们
专注于工业润滑领域一站式采购 电话:0755-28027380 传真:0755-28027382 手机:13926530627 13537722320
润滑油分类
液压油系列
齿轮油系列
空压机油
切削液切削油
导轨油
涡轮机润滑油
冷冻机油系列
船用机油
润滑脂系列
变压器油

工业润滑油工业润滑油
 
产品展示 >> 福斯RENOLIN CKC 150
福斯RENOLIN CKC 150详细说明 (浏览1066次)

RENOLIN CKC

High Performance CKC Gear Oils

High Performance CKC Gear Oils

Gearboxes designed for the transfer of power or torque can only perform effectively when excessive wear which can occur at high or fluctuating loads, particularly around the reference circle, is avoided. The life of a gearbox depends on the correct selection of the most suitable lubricating oil. The principal function of a gear oil is not just to lubricate bearings and the gears themselves, i.e. to reduce friction and avoid wear but also to provide protection against corrosion, to cool and to seal. The RENOLIN CKC gear oils contain carefully selected base oils and matched additives to protect machinery from undue wear in especially critical boundary friction conditions. RENOLIN CKC products can be classified as CKC lubricating oils according to ISO 6743-6.

The special characteristics of RENOLIN CKC series lubricants are:

  • High pressure absorption and excellent wear protection
  • Good viscosity-temperature behaviour and excellent low-temperature characteristics
  • Good corrosion protection for steel and nonferrous metals
  • Good resistance to ageing
  • Good compatibility with sealing materials
  • Low foaming
  • Avoidance of frictional vibration by the use of surface-active additives
  • Good demulsification characteristics
  • Multipurpose applications

Application:

RENOLIN CKC series oils are recommended for all industrial applications where the machinery manufacturer recommends the use of a CKC type oil. Highly-stressed bearings, joints, pressure spindles, spur and worm drive gears are reliably, effectively and economically lubricated at temperatures of up to 120°C. The use of these oils guarantees the quiet and smooth running of machinery along with optimum operational reliability. The use of these oils also allows drain intervals to be extended. Please consult our Application Engineers for suggestions on how this series of oils can be used to rationalize oil stocks.

RENOLIN CKC 100 150 220 320 460 680
Lubricating oil type
acc. to ISO 6743-6 CKC 100 CKC 150 CKC 220 CKC 320 CKC 460 CKC 680
acc. to DIN 51 502 CLP 100 CLP 150 CLP 220 CLP 320 CLP 460 CLP 680
Characteristics Unit Test method
Colour 2 3 4 4.5 5 5 ASTM D 1500
Kinematic viscosity
at 40 °C mm²/s 94.4 145.6 214 331 468 690 ASTM D 445
at 100 °C mm²/s 11.1 14.5 18.5 24.6 30.8 36.8 ASTM D 445
Viscosity index 102 98 96 96 95 87 ASTM D 2270
Density at 15 °C kg/l 0.884 0.89 0.895 0.9 0.903 0.922 ASTM D 1298
Flash point, Cleveland open cup °C 220 225 230 230 240 245 ASTM D 92
Pour point °C – 27 - 24 - 21 - 15 – 12 – 12 ASTM D 97
Neutralization number mg KOH/g 0.33 0.33 0.33 0.33 0.33 0.33 ASTM D 974
Saponification number mg KOH/g 1.3 0.84 0.84 0.84 0.84 0.84 ASTM D 94
Sulphate ash % mass 0.1 0.1 0.1 0.1 0.1 0.1 ASTM D 874
Water content % mass not traceable not traceable not traceable not traceable not traceable not traceable ASTM D 95
Insolubles % mass not traceable not traceable not traceable not traceable not traceable not traceable DIN 51 592
Demulsification min < 20 < 20 < 20 < 20 < 20 < 20 DIN 51 599
Foaming,
seq. I ml < 10/0 < 10/0 < 10/0 < 10/0 < 10/0 < 10/0 ASTM D 892 seq. I-III
seq. II ml < 10/0 < 10/0 < 10/0 < 10/0 < 10/0 < 10/0 ASTM D 892 seq. I-III
seq. III ml < 10/0 < 10/0 < 10/0 < 10/0 < 10/0 < 10/0 ASTM D 892 seq. I-III
Copper corrosion degree of corr. 1a-100A3 1a-100A3 1a-100A3 1a-100A3 1a-100A3 1a-100A3 ASTM D 130
Rust prevention pass B pass B pass B pass B pass B pass B ASTM D 665
Ageing behavior,
viscosity increase % 1 1 1 1 1 1 ASTM D 2893
precipitation number increase ml < 0.05 < 0.05 < 0.05 < 0.05 < 0.05 < 0.05 ASTM D 2893
FZG mechanical gear rig test load stage 12 12 12 12 12 12 DIN 51 354-2
Effect on SRE-NBR 1 seal material acc to DIN 53 538-1 at 100 °C +/– 1 °C after 7 days +/– 2 hours,
relative volume change % 7 7 7 7 7 7 DIN 53 521 together with DIN 53 505
change in Shore A hardness Shore - 3 - 3 - 3 - 3 - 3 - 3 DIN 53 521 together with DIN 53 505
上一产品: 美孚SHC(合成齿轮油)系列
下一产品: 福斯RENOLIN CLP 100
Copyright (C)  深圳市鑫盈科贸易有限公司 http://86hrb.com All Right Reserved
地址:深圳宝安龙华区民治工业区 电话:0755-28027380 传真:0755-28027382 网址:http://86hrb.com 邮箱:xykrhy@126.com 
网站关键词:工业润滑油|壳牌润滑油|美孚润滑油|福斯润滑油|加德士润滑油|嘉实多润滑油 
标识